High Capacity Disposable Nitrogen (N2) Gas Cylinder - 1.43L - 110Bar High Capacity: 157L (at standard temperature and pressure) 86 grams FOOD GRADE Nitrogen (N2)
Specifications Cylinder Type: 3 Piece Welded Cro-Molly Alloy Cylinder Volume: 1.43L Working Pressure: 110bar (1595.42psi) Test Pressure: 180bar (2610.68psi) This cylinder will dispense a little over 40 liters of stout or nitro coffee.
Directions for use This bottle is compatible with our Kegland Inert Gas Regulator. It's also compatible with many other regulators already on the market. 1. Remove the protection cap from the valve. 2. Connect the regulator to the cylinder valve. There may be some gas escaping as you're screwing on so screw the gas cylnider into the regulator quickly to limit this loss, continue to screw on until gas stops. 3. Set the outlet flow/pressure on the regulator. Please note to turn off the gas you must remove the regulator from the cylinder. PLEASE NOTE: If you are removing the regulator at any point you MUST use a spanner to hold the brass neck of the cylinder. Failure to do so could cause the strong adhesive glue to crack and the cylinder detach from the fitting.
To avoid the chance of leaks and returning to an empty bottle, please triple check every connection point on your system or disconnect your gas cylinder between uses.